Saving Keyboard Setups To Registration Memory; To Save A Setup To Registration Memory; To Recall A Setup From Registration Memory - Casio Keyboard CDP-200R User Manual

To save a setup to registration
memory
1.
bs
Press .
Bank number
2.
Configure the tone, rhythm, and other settings
you can to include in the setup.
3.
cm
Press to select the bank you want.
cm
Each press of cycles through the bank numbers.
• You also can select a bank by holding down
cl
use the (10-key) number buttons to enter a bank
number.
4.
While holding down
cq
to to select an area.
This will save the settings you configured in step 2 into the
applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.
Stored in Setup 4-1
S t o r e
Lights
Bank 4
cm
as you
cr
, press a button from

Saving Keyboard Setups to Registration Memory

To recall a setup from registration
memory
1.
cm
Press to select the bank that contains the
setup you want to recall.
2.
Use buttons
setup you want to recall.
This will recall the registration memory setup and
automatically configure the piano settings accordingly.
• Notes currently being sounded by the keyboard may stop if
you recall a setup that causes a change in octave shift
(page E-15). To keep this from happening, either select a
setup that does not cause a change in the octave shift
cn
setting, or hold down the pedal (which will cause notes
currently being played to be sustained).
■ Saving registration Data on an External Device
• SD memory card (page E-58)
• Computer (page E-65)
■ Maintaining Data in Registration Memory
After you save data in registration memory, it will remain there
as long as power is supplied to the piano. However, if you
disconnect the AC adaptor, data in registration memory will be
deleted.
Bank 6
cn cq
to to select the area whose
Setup 6-1 recalled
R e c a l l
E-45