Saving Digital Piano Data To An Sd Memory Card - Casio Keyboard CDP-200R User Manual

Using a Memory Card
Saving Digital Piano Data to an
SD Memory Card
Use the following procedure to save Digital Piano data to an
SD memory card.
1.
On the Digital Piano, select the data you want to
save as described below.
To save this type
of data
Sampled sound Select the tone number of the sampled
sound you want to save.
User rhythm Select the rhythm number of the user
rhythm you want to save.
Recorded song Select the song you want to save and
put the Digital Piano in playback
standby.
User scale Press
memory
Registration data
Select one of the Digital Piano's default
built in tones or rhythms.
All data
• You cannot save a user song (song data loaded from
an external device) to an SD memory card.
• See page E-56 for information about data types.
2.
Insert a SD memory card into the piano's card
slot.
3.
ck
Hold down until the button lights.
• To cancel data save, press
Example: Saving a sampled sound
S m
E-58
Do this
bs 5
and then .
ck
again.
Flashes
l T o n e
p
4.
cl
Use the (10-key) [4] (u) and [6] (i) keys to
display one of the settings shown below.
• You also could use [–] and [+].
To save this data
Sampled sound "SAv" "SmplTone"
User rhythm "SAv" "UserRhy."
Recorded song "SAv" "Rec.Song"
Recorded song
"SAv" "SMF 0"
(SMF 0 format)
User Scale Memory "SAv" "ScaleMem"
Registration data "SAv" "Regist."
All data "SAv" "All Data"
Saving a recording made while playing along with a built-in
song in SMF 0 format will save only what was played on the
keyboard.
5.
cl
Press the (10-key) [7] (ENTER) key.
Flashes
U S E R N A M E
• Enter the file name of the data you are saving. Use the
cl
(10-key) [4] (u) and [6] (i) keys to move the
cursor to the character you want to change, and then
use [+] and [–] to change the character.
• Pressing [9] (EXIT) will return to the screen that was
displayed before you pressed [7] (ENTER).
6.
cl
Press the (10-key) [7] (ENTER) key.
This will save the data to the SD memory card.
C o m
• If there is a file with the same name already on the SD
memory card, a message will appear asking if you want
to overwrite it. Press the
overwrite, or [–] (NO) or [9] (EXIT) to cancel.
R e
Display this screen
l e t e
p
cl
(10-key) [+] (YES) key to
l a c e ?
p