Configuring Wap Parameters - Sagem myX3-2 User Manual

251400892 myX3-2 English.book Page 39 Jeudi, 27. novembre 2003 2:10 14
WAP

Configuring WAP parameters

Advanced...: offers the following advanced settings
- Configuring parameters
- Show URL
- Logoff
- Circuit message (if user can confirm each logon)
- Security (is used to access information on making WAP connections
secure).
About...: information on the browser.
Exit: returns to the phone's home page.
Select the Advanced... menu, then the configuration menu.
Choose from the sub-menus offered:
Logon parameters is used to select or modify your access provider's
logon parameters or configure the parameters of other access providers.
The active access service is preceded with a start.
Configuration of WAP and GPRS parameters:
All information to be entered in the parameters are provided by your
operator or access provider.
- Choose desired access service, then press Choice.
- Enter title of service and accept.
- Enter Internet address of home page and accept.
- Enter parameters of preferred logon:
GPRS otherwise GSM (by default): the logon to WAP services uses the
GPRS as a priority. However, in the event of unavailability of the GPRS
network, the GSM network is used to establish the link.
GPRS: the logon to WAP services uses the GPRS network exclusively.
GSM: the logon to WAP services uses the GSM network exclusively.
39