Rear Panel Connections - Strymon DIG Quick Start Manual

REAR PANEL CONNECTIONS

AUDIO INPUT SELECTOR
MONO: Use with a mono input signal.
Output is stereo.
STEREO: Use with a stereo input
signal. Output is stereo.
IN
High impedance, ultra low-noise,
discrete Class A JFET preamp input.
TRS adapter cable required for stereo
input signal.
OUTPUTS
Low impedance stereo audio signal
outputs. Use OUT L for mono output.
>> Download the complete User Manual at strymon.net/support/dig-v2/ <<
EXP / MIDI
Multifunction communication jack for external control of DIG's features and
functions. Use a standard TRS expression pedal for continuous control over
the knobs of the pedal (default setting). See complete User Manual for details
about configuring for MIDI communication or accessories such as Strymon
Conduit, MultiSwitch Plus, and MiniSwitch.
USB-C
Computer connection for
controlling via MIDI and firmware
updates.
9VDC
Use the included power supply
or an adapter with the following
rating: 9VDC, center negative,
300mA minimum.