Rear Panel; Mod Machine Parameters; Editing Parameters; Important Global Settings - Strymon Mobius User Manual

Mobius
- User Manual

REAR PANEL:

INPUTS: High
impedance
inputs. Use
LEFT input
for mono.
RIGHT IN is
used as input
2 if using OUTPUTS: Use LEFT
a pre/post output for mono. RIGHT
confi guration. OUT is used as output
2 if using a pre/post
confi guration.

MOD MACHINE PARAMETERS:

TAPDIV (TAP DIVISIONS): When tapping tempo, BPM can be set for Whole, Half, Quarter, Dotted Eight, Eighth, Triplets, or
Sixteenth notes
PR/PST (PRE/POST): If using a pre/post setup, this selects whether the effect in the preset is pre or post.
NAME: Allows editing the 16 character name of the current preset. Use the VALUE encoder to change the selected character.
VALUE
SPEED
Use the TYPE encoder to select a character. Exit by pressing the VALUE encoder, then press and hold the TYPE encoder to
push (param)
hold (global)
save the name permanently. Note: For the preset name to be displayed the NAMES global must be set to ON or SCROLL.
EP (EXPRESSION PEDAL ON/OFF): Confi gure the Expression pedal input to be ON or OFF.
EP SET (EXPRESSION PEDAL SET UP): Set up which knobs are controlled by the expression pedal. Turn the knobs while HEEL
is displayed to select the minimum setting for each knob to be controlled. Turn the knobs while TOE is displayed to select the
maximum setting for each knob to be controlled.
PARAM 1
®
B

EDITING PARAMETERS:

While displaying
BANK, NAME, or
push (param)
FILTER FORMANT
push the
hold (global)
BPM
PHASER VINTAGE TREM
value encoder
VIBE PATTERN TREM
ROTARY AUTOSWELL

IMPORTANT GLOBAL SETTINGS:

FLANGER DESTROYER
CHORUS QUADRATURE
TYPE
push (bank/BPM)
hold (save)
BPM/HZ: Sets display to show tempo in BPM or Hz.
BYPASS: Select TRUEBYP to bypass with true bypass relays. Select BUFBYP to bypass with a high quality analog buffer.
A
GLOBAL TAP: Allows the last tapped tempo to affect all presets regardless of the tempo saved in the preset.
NAMES (PRESET NAMES): Set to OFF to only display bank number, set to ON to show the fi rst six characters of the preset
VALUE SPEED
BANK DOWN
name, set to SCROLL to scroll the preset name across the display when it is fi rst selected.
push (param)
hold (global)
EXP MD (EXP MODE): Confi gures the EXP input to use an expression pedal or an external tap footswitch.
PARAM 1
®
B
INPUT 2
EXP: Connect
an expression
pedal or switch
for external tap
tempo.
Each Mod Machine has numerous parameters in the parameter menu to tweak and customize your
sound. Please consult the Pages 8-19 for a full explanation of all deep edit parameters.
COMMON PARAMETERS - These are available on Mod machines and saved per preset
DEPTH LEVEL
PARAM 2
UNIQUE PARAMETERS - All Mod machines feature unique parameters. For a full listing
of each parameter available on every Mod machine type please consult the User Manual.
TAP
BANK UP
to enter PARAMS
VALUE SPEED DEPTH
menu
FILTER FORMANT
PHASER
VIBE
ROTARY
To access the global menu push and hold the value encoder. Turn the encoder to select the global to
FLANGER
PARAM 1 PARAM 2
CHORUS QUADRATURE
edit. Push the value encoder again to edit the selected global. Hold again to exit the global menu.
®
TYPE
push (bank/BPM)
hold (save)
B A
DEPTH LEVEL
BANK UP
The full list of global settings are detailed on Pages 20-21.
PARAM 2
TAP
STEREO
IN/OUT
PRE /
POST
OUTPUT 2
SIGNAL ROUTING SWITCH: Choose
between standard stereo in/out
operation or pre/post mode. Turn to
Page 22 for more details.
to select the desired
LEVEL VALUE SPEED
PARAMETER
push (param)
turn the
hold (global)
VINTAGE TREM PHASER
value encoder
PATTERN TREM VIBE
AUTOSWELL ROTARY
DESTROYER FLANGER
PARAM 1
®
TAP B
BANK DOWN
MIDI: Full featured MIDI input
and output supporting MIDI CCs,
Program changes, etc. Consult
Page 23 for full MIDI spec.
DEPTH LEVEL VALUE
push (param)
FILTER FORMANT
push the value
hold (global)
VINTAGE TREM
encoder again
PATTERN TREM
AUTOSWELL
DESTROYER
PARAM 2
CHORUS QUADRATURE
TYPE
push (bank/BPM)
hold (save)
A TAP
BANK UP BANK DOWN
®
POWER: NEVER
plug into voltage
higher than 9VDC.
Requires at least
300mA of available
current.
and turn to edit the
SPEED DEPTH LEVEL
selected PARAMETER
PARAM 1 PARAM 2
®
B TAP
BANK UP
pg 3