Other Parameters - Roland GAIA SH-01 Owner's Manual

Other Parameters

Parameter Range
RECORDER SYNC
OFF, ON
OUTPUT
Specifies how the metronome will sound.
OFF: Metronome will not sound.
RECORDER
REC-ONLY: Metronome will sound only during recording.
METRONOME MODE
REC&PLAY: Metronome will sound during recording and playback.
ALWAYS: Metronome will sound constantly.
RECORDER
0–7
METRONOME LEVEL
OFF,
1 min,
Time setting for 3 min,
POWER SAVE MODE 5 min, 10 min,
20 min, 30 min,
60 min
MANUAL (p. 30)
Hold down the [PRESET PATCH] button and press the [USER PATCH] button.
TONE COPY (p. 30)
1. Press the [TONE COPY] button.
2. Press the [SELECT] button of the copy-source tone.
3. Press the [SELECT] button of the copy-destination tone.
How to Initialize a Patch
Hold down the [CANCEL/SHIFT] button and press the [WRITE] button.
54
Explanation
If this is on, MIDI clock messages (F8) will be
transmitted to an external MIDI device.
Specifies the volume of the metronome.
If no operation is performed during the duration
of time you specify here, the SH-01 will enter
power-conservation mode.
Panel operation
1.
Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [PLAY/STOP] button and press the EFFECTS
[TEMPO SYNC] button.
Button lit: ON
Button unlit: OFF
3. Press the [CANCEL/SHIFT] button.
1.
Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [REC] button and press one of the following
effect buttons.
[DIST] button: OFF
[FLANGER] button: REC-ONLY
[DELAY] button: REC&PLAY
[REVERB] button: ALWAYS
3. Press the [CANCEL/SHIFT] button.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2.
Hold down the [REC] button and press one of the NUMBER
[1]–[8] buttons.
1–8: 0 (minimum) – 7 (maximum)
3. Press the [CANCEL/SHIFT] button.
1.
Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the EXT IN [MUTE] button and press one of the
NUMBER [1]–[8] buttons.
1: OFF
2: 1 min
3: 3 min
4: 5 min
5: 10 min
6: 20 min
7: 30 min
8: 60 min
3.
Press the [CANCEL/SHIFT] button.