Inst Screen Quick Menu - Roland OCTAPAD PAD-80 Owner's Manual

HH CTRL setting examples
If a hi-hat control pedal is connected
Choose "PEDAL" for the pad that's assigned to the hi-hat Inst.
If a hi-hat control pedal is not connected
Make the following settings if you want to assign the closed hi-hat and open hi-hat sounds to two different pads.
If you want to use one pad to play both the closed hi-hat , and be able to switch to the open hi-hat, choose the same hi-hat Inst for both
Inst A and B of a single pad, set "Inst Layer Type" (p. 30) to "SWITCH, " and set HH CTRL as follows. Use the "Layer Point" (p. 30) setting to specify
the dynamic level at which the hi-hat will open.

INST Screen QUICK MENU

From the INST screen, press the [QUICK] button to access the following QUICK MENU.
Menu Explanation
Copy Pad Copy pad settings.
Paste Pad
Paste pad settings.
Pad Exchange Access the Pad Exchange screen where you can exchange pads.
Multi Edit Access the MULTI EDIT screen where you can edit the tuning and volume of each pad.
Kit Protect ON/OFF Switch the kit protect setting on/off.
Volume
Playing
Dynamics
Set to "PEDAL"
Set Inst A to "CLOSE"
Set Inst A to "OPEN"
Set Inst A to "CLOSE"
Set Inst B to "OPEN"
Page
p. 35
p. 35
p. 36
p. 24
p. 34
33