Reset To Default Factory Setting (Factory Reset); Sound List - Roland VP-7 5100012850-01 Owner's Manual

Reset to Default Factory Setting (Factory Reset)

The "factory reset" operation will return all settings stored in the VP-7 to their factory-set state.
The factory reset operation will initialize the following items.
Item
The last-selected sound
MIDI receive mode (p . 11)
Dynamics setting (p . 25)
Pitch bend range (p . 29)
1. Turn off the VP-7's power .
2. While holding down the [Bypass] button and the [Female Choir] button, turn on the power .
All indicators will light.
When the factory reset is completed, all indicators will go out, and the VP-7 will return to its normal state.
Sound List
The VP-7 allows you to switch its sounds from an external MIDI device, using program change messages.
The program numbers are determined according to the sound and the Bypass on/off state, as shown in the table below.
Program Number
Bypass
OFF
1
2
Human
Voice
3
4
5
Vocal
6
Designer
7
8
Vocoder 9
10
11
12
13
Variation 14
15
16
17
30
Default value
Human Voice - Female Choir
Ch1
2
2
Bank Select: MSB=80, LSB=0
Sound name
Bypass
ON
18 Female Choir
19 Kids Choir
20 Gregorian Choir
21 Jazz Scat
22 Duet
23 Trio 1
24 Trio 2
25 Vocoder 1
26 Vocoder 2
27 Vocoder 3
28 Male & Female
29 Kids Choir 2
30 Classic
31 Jazz Scat 2
32 Background
33 Pop
34 Gospel
If a program number from 1 through 17
is received, Bypass will turn off, and the
Human Voice/Vocal Designer/Vocoder
sound will be heard.
If a program number from 18 through 34
is received, Bypass will turn on, and only
the direct sound from the microphone
will be heard.
If you want to turn bypass on/off via
MIDI, use CC #66 to control it.
If you've connected a digital piano
(e.g., Roland HP series), you can use the
sostenuto pedal to control this.
You can also transmit program change
messages to turn bypass on/off.