Formatting The Sd Memory Card (Format [Card]) - Ricoh Caplio R40 User Manual

Formatting the SD Memory Card
(FORMAT [CARD])
If the error message [CARD ERROR] is displayed when an SD memory card is
loaded into the camera or the card has been used with a computer or other device,
you must format the card prior to use with this camera.
Formatting is the process of preparing a card so image data can be written on it.
Caution
If you format a card that still has images stored on it, the images will be lost.
Reference
For information on how to format the internal memory, see P.111.
To format a card, follow the steps below.
1.
Display the SETUP menu.
For the operating procedure, see P.109.
2.
Press the " button to select
[FORMAT [CARD]] and press the
$ button.
A screen appears to confirm formatting.
3.
Press the #$ buttons to select
[YES] and then press the C/
D button.
Formatting starts. When it is done, the
display returns to the SETUP menu.
If no SD memory card is loaded, a message will be displayed.
After turning the power off, load an SD memory card and repeat the
formatting process again.
Note
Protecting your images from being deleted
Move the write-protection switch on the SD memory card to "LOCK" to prevent your still
images from being accidentally erased or the card from being formatted. (P.18)
If you unlock the card (by returning the switch to its original position), it is once again possible
to erase images and format the card.
110