Ricoh Caplio R40 User Manual page 128

To change the USB setting, follow the steps below:
1.
Display the SETUP menu.
For the operating procedure, see P.109.
2.
Press the " button to select [USB CONNECTION] and press
the $ button.
3.
Press the !" buttons to select
the desired setting.
4.
Press the C/D or # button.
5.
If you pressed the # button in
Step 4, press also the C/D
button.
This setting is used until it is changed.
Reference
For information on how to transfer images using RICOH Gate La, see P.143.
126