Changing The Display; Maximizing The Lcd Monitor Brightness - Ricoh Caplio R40 User Manual

Changing the Display

Pressing the DISP. button allows you to change the screen display
mode and toggle the information displayed on the LCD monitor.
Each time you press the DISP. button, the display changes in the
following order: Histogram, Grid Guide, No Display, LCD Monitor
Off, and Normal Symbol Display.
Normal Symbol Display
LCD Monitor Off
(Synchro-Monitor Mode)

Maximizing the LCD Monitor Brightness

Hold the DISP. button down to maximize the display brightness.
When the brightness is at the maximum setting, holding the DISP. button
down returns the brightness to the level set in [LCD BRIGHTNESS] (P.112).
Term
Grid Guide
This displays auxiliary lines on the LCD monitor to help you compose your picture. These
lines are not recorded with images.
Synchro-Monitor Mode
This turns the LCD monitor off except when the camera is operated. This mode is effective for
saving power consumption. In this mode, pressing the shutter release button halfway turns
the LCD monitor on. Subsequently, pressing the shutter release button fully displays the shot
image on the LCD monitor and then turns the LCD monitor off.
Histogram
Press the DISP. button to
change the display.
Grid Guide
No Display
25