Advertisement
Limited Warranty
ResMed warrants that your ResMed mask system, including its components:
mask frame, cushion, headgear, tubing and other accessories ("Product") shall
be free from defects in material and workmanship for a period of ninety (90)
days from the date of purchase by the initial consumer.
For further details refer to the Warranty.
Technical Specifications
Note: The mask system does not contain latex, PVC or DEHP materials.
Pressure–Flow
Curve
Dead Space
Information
Therapy Pressure
Resistance
Environmental
Conditions
Gross
dimensions
Note: The manufacturer reserves the right to change these specifications
without notice.
Storage
Ensure that the mask is thoroughly clean and dry before storing it for any
length of time. Store the mask in a cool dry place out of direct sunlight.
Disposal
The Mirage Micro does not contain any hazardous substances and may be
disposed of with your normal household refuse.
The mask contains passive venting to protect
against rebreathing. As a result of manufacturing
variations, the vent flow rate may vary.
50
45
40
35
30
25
20
15
10
5
0
4
6
8
10
Mask Pressure (cm H
The dead space of the mask varies according to cushion size. It is
128 mL for the Extra Large size.
4 to 20 cm H
O
2
Drop in pressure measured (nominal)
at 50 L/min: 0.1 cm H
at 100 L/min: 0.7 cm H
Operating temperature: +41°F to 104°F (+5°C to +40°C)
Operating humidity: up to 95% non-condensing
Storage and transport temperature: -4°F to 140°F (-20°C to +60°C)
Storage and transport humidity: up to 95% non-condensing
S:
140 mm (H) x 91 mm (W) x 93 mm (D)
M, L, LW, XL: 155 mm (H) x 91 mm (W) x 98 mm (D)
Mask fully assembled – no headgear.
12
14
16
18
20
O)
2
O
2
O
2
8
Pressure
Flow
(cm H
O)
(L/min)
2
4
19
8
28
12
34
16
40
20
45
Advertisement
