Hitachi CPX380W Service Manual page 29

Pass the A84 cable through the right side of a
A84
catch on the upper case as shown in the diagram.
* Installing the A84 cable on the upper case
and affixing of the TAP1 are to be performed
TAP1
in accordance with an assembly drawing.
To disconnect or remove the cable, firmly hold the upper case,
paying attention not to give any stress to the cable.
After connection has been finished, install the upper case while
pressing the extra length of the A84 cable into the set.
Moreover, when the front bezel is installed, be careful not to get
the cable caught in.
Be careful not to get the cable caught
in while installing the upper case.
* Installing the A83 cable on the upper case
and affixing of the TAP1 are to be performed
in accordance with an assembly drawing.
Upper case
When installing the front bezel,
exercise utmost caution not to
get the cable caught in.
ESPL
TAP1 A83
Pass the A83 cable through the left side of a
catch on the upper case as shown in the diagram.
To disconnect or remove the cable, firmly hold the upper case,
paying attention not to give any stress to the cable.
After connection has been finished, install the upper case while
pressing the extra length of the A83 cable into the set.
Moreover, when the front bezel is installed, be careful not to get
the cable caught in.
ESPR
Be careful not to get the cable
caught in while installing the
upper case.