Simrad GO XSE Series Installation Manual page 42

Hide thumbs Also See for GO XSE Series:

Table of Contents

Source

Select this option to display a list of sources available for setup. The

settings you make in the rest of the dialog pertain to the source

selected.

Source name

Select this option to set a descriptive name for the selected

transducer.

Search depth

Noise may cause the echosounder to search for unrealistic depths.

By setting the search depth manually the system displays echoes

received from objects within the set depth range.

Depth offset

All transducers measure water depth from the transducer to the

bottom. As a result, water depth readings do not account for the

distance from the transducer to the lowest point of the boat in the

water or from the transducer to the water surface.

•

To show the depth from the lowest point of the vessel to the

bottom, set the offset equal to the vertical distance between the

transducer and the lowest part of the vessel, A (negative value).

•

To show the depth from the water surface to the bottom, set the

offset equal to the vertical distance between the transducer and

the water surface, B (positive value)

System setup

| GO XSE/XSR Installation Manual

Table of Contents

Go xsr series