Advertisement
3
Installing the Kit
Parts needed for this procedure:
1
Baffle
1
Carriage bolt (5/16 x 3/4 inch)
6
Flange nut (5/16 inch)
2
Blade
1
Kicker plate
Procedure
1. Loosely install the baffle assembly to the right side of
the mower deck using the carriage bolt (5/16 x 3/4
inch) and 2 flange nuts (5/16 inch) as shown in
4.
Discharge deflector removed for clarity
1. Flange nut (5/16 inch)
2. Baffle assembly
2. Remove the 2 plug bolts and nuts from the deck as
shown in
Figure
5.
Figure 4
3. Carriage bolt (5/16 x 3/4
inch)
4. Welded post
1. Kicker plate
2. Flange nut (5/16 inch)
3. Secure the kicker plate to the left side of the mower
deck using 4 flange (5/16 inch) nuts as shown in
5.
4. Tighten all hardware.
Figure
3
Figure 5
3. Remove plug bolts and
nuts
Figure
Advertisement
