Table of Contents
Advertisement
Item
FORWARD WAIT
FEED KEY
KANJI CODE
EURO CODE
AUTO HD CHK
ACK/BUSY TYPE
WEB PRINTER
SILENT PRINT
KB80 CONNECT
PRTR IP ADDR
GATE IP ADDR
SUBNET MASK
TTF AREA
EXT CHR AREA
PC SAVE AREA
PCL EMULATION
PRINT SPEED
Contents
Forward feed standby after an
issue
[FEED] key function setting
Kanji code type
Euro code setting
Automatic broken dots check
setting
Centronics ACK/BUSY timing
setting
Web printer function setting
Silent printing function setting
Keyboard (KB-80) connection
setting
Printer IP address
Gateway IP address
Subnet mask
TrueType font storage area size
Writable character area size
PC saving area size
PCL emulation setting
Print speed for PCL emulation
- 38 -
Remarks
ON:
Performed
(The
stop
adjustment value is also
printed.)
OFF:
Not performed
FEED:
One label is fed.
PRINT: Data in the image buffer is
printed on one label.
TYPE1: For Windows codes
TYPE2: For original codes
Any set code
ON: Automatic broken dots check
is performed.
OFF: Automatic broken dots check
is not performed.
TYPE 1: The ACK signal is sent to
match the fall of the BUSY
signal and the end of the
LOW level of the ACK
signal.
TYPE 2: The ACK signal is sent to
match the end of the
HIGH level of the ACK
signal and the fall of the
BUSY signal.
ON: Enabled
OFF: Disabled
ON: Enabled
ON: The keyboard is connected.
OFF: The keyboard is not
connected.
***.***.***.***
***.***.***.***
***.***.***.***
0 KB to 896 KB (in units of 64 KB)
0 KB to 896 KB (in units of 64 KB)
0 KB to 896 KB (in units of 64 KB)
ON: PCL emulation mode
OFF: Command mode
2"/s: 2 inches/sec.
4"/s: 4 inches/sec.
–:
When PCL emulation setting
is OFF.
position
fine
Advertisement
Table of Contents
