Table of Contents
Advertisement
To reduce the possibility of electrostatic discharge, observe the following
precautions:
v Limit your movement. Movement can cause static electricity to build up around
v Handle the device carefully, holding it by its edges or its frame.
v Do not touch solder joints, pins, or exposed printed circuitry.
v Do not leave the device where others can handle and possibly damage the
v While the device is still in its static-protective package, touch it to an unpainted
v Remove the device from its package and install it directly into your system unit
v Take additional care when handling devices during cold weather because heating
12
IBM xSeries 345 Type 8670: Option Installation Guide
you.
device.
metal part of the system unit for at least 2 seconds. (This drains static electricity
from the package and from your body.)
without setting it down. If it is necessary to set the device down, place it in its
static-protective package. Do not place the device on your system unit cover or
on a metal table.
reduces indoor humidity and increases static electricity.
Advertisement
Table of Contents
