Connecting A Dash Camera To The Powered Mount; Data Management - Garmin DEZL OTR810 Owner's Manual

Changing the Camera Orientation
Depending on where the camera is placed on your vehicle, the video on your device may appear upside down or
mirrored by default. You can rotate the video horizontally or flip the video vertically to correct the video.
1 From the camera view, select an option:
• Select > Adjust Video.
• Tap the screen and select
2 Select to reverse the image or
3 Select .

Connecting a Dash Camera to the Powered Mount

It is your responsibility to ensure that the mounting location complies with all applicable laws and ordinances
and does not block your view of the road to ensure safe operation of your vehicle.
Before you connect a dash camera to the powered mount, you should mount the dash camera device to your
windscreen.
You can use the dēzl device mount to power a compatible Garmin dash camera. This can be useful if you need
to connect the dēzl device and the dash camera to the same power source in your vehicle.
1 Mount the dēzl device in your vehicle, and connect it to power
Vehicle, page 3).
2 If necessary, remove the dēzl device from the magnetic mount for a better view of the USB port.
3 Plug the dash camera's power cable into the USB port

Data management

The device has a memory card slot for additional data storage.
NOTE: the device is compatible with Windows 7 and newer, and Mac OS 10.7 and newer. Apple computers may
require additional third-party software to read and write files.
Appendix
.
to flip the image.
WARNING
on the mount.
(Mounting and Powering the Device in Your
77