Advertisement
time to turn on Wireless function and the LED
DISPLAY shows 'ON' for 3 seconds.
NOTE: When you restart the Wireless function,
it may take some time to connect to the
network automatically.
Selects the appropriate operating mode. Each
time you press the button, a mode is selected
in the following sequence: AUTO, COOL,
DRY, FAN and HEAT (cooling only models
without). The mode indicator light illuminates
under the different mode settings.
Fan/Constant fan(On some models) button
Controls the fan speed. Press to select the fan
speed in four steps-LOW, MED, HIGH and AUTO.
The fan speed indicator light illuminates under
different fan settings. Selecting AUTO fan
speed darkens all the fan indicator lights.On
some models, selecting AUTO fan speed
illuminates all the fan indicator lights
NOTE: In cooling or DRY mode, press the button
for 3 seconds to turn the constant fan function
on or off. When the function is turned on, the
constant fan light will illuminate, identifying
the fan's continuous run for cooling. When the
function is turned off, the constant fan light will
go out, identifying the fan cycle runs with
compressor stoppage.
Shows the set temperature in °C or °F("°F"
doesn't display for some models) and the
Auto-timer settings. While on DRY and FAN
modes, it shows the room temperature.
obstructions. Restart the unit. If the malfunction
is still present, turn off the unit and unplug the
power cord. Contact the manufacturer, its
service agents or a similarly qualified person for
service.
HEAT operation (not included with cooling only models)
Advertisement
