Raymarine 465 Instruction Manual page 37

Page Control
Pad Up and down arrows – ( and )
During setup – Use these controls to call up a choice or
move to the next line on a menu.
If the Zoom display is turned on – If the manual zoom
feature is turned on, these will move the zoom display up
or down.
Left and right arrows – (< and >)
During normal display – Use these buttons to go to the
next display.
During setup – Use these arrows to make a choice within a
line on the menu.
To enter the Setup Menu – Press
SETUP
To go to the System Setup Menu – Press this button
twice in all normal displays. If the sidelooker split screen
(Window Page options F, G, or H) is enabled, this button
must be pressed three times.
During setup – Once you make a change, press
save the change and go back to the normal display.
CLEAR
During normal display – When an alarm is triggered,
use
to be indicated on the display.)
During setup – Once you make a change, press
save the change and go back to the normal display.
When the unit is first turned on, it will present the normal FishFinder
Page. You can reach the Zoom, A-Scope and Bottom Lock Modes by
pressing buttons on the control panel. See Fig. 3-12.
The "Zoom" Mode shows a magnified view of a section of
ZOOM
the display area.
The "A-Scope" Mode shows a "real time" view of the area
A-SCP
directly under the transducer.
26
to turn off the buzzer. (The alarm will continue
CLEAR
at any time.
SETUP
SETUP
CLEAR
Operating Instructions
to
to