• "Computer cover" on page 49
• "E-lock" on page 71
• "Rear fan" on page 84
Removal steps
ThinkCentre LED
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove these parts in order, if any:
• "Computer cover" on page 49
• "Optical drive" on page 50
• "Front bezel" on page 51
• "Optical drive cage" on page 55
2. Disconnect the ThinkCentre LED cable from the system board.
86
M90t Gen 3 Hardware Maintenance Manual