• "Computer cover" on page 49
• "M.2 solid-state drive and heat sink" on page 58
Replacement procedure
PCI-Express connector cable
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the "Computer cover" on page 49.
2. Disconnect the PCI-Express connector cable from the system board.
Removal steps
PCI-Express card
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove the "Computer cover" on page 49.
.
Chapter 6
Hardware removal and installation
61