Table of Contents
Advertisement
Setup
1
Connect the antennas
Place the antenna squarely over the antenna terminal in the
1
upper-left or upper-right corner of the rear panel.
Turn the antenna clockwise until it is fully connected.
2
Do not over tighten.
Rotate the antenna upwards for the best possible reception.
3
1
NOTE
The antennas are required for both Bluetooth and Wi-Fi functions.
2
3
Optional
If you are connecting PMA-900HNE to a wired network, connect an Ethernet
cable (not included) between the amplifi er and your router. Do not connect the
Ethernet cable if you are connecting the amplifi er to a wireless network.
EN
F R
ES
2
Advertisement
Table of Contents
