Viewing Ups Monitoring Parameters; Forcing The Ups To Shut Down; Receiving Event Traps - Powerware BD User Manual

UPS Power Management
2. The xups.mib and stdupsv1.mib files (on the supplied
CD-ROM) contain the MIB for the ConnectUPS
Web/SNMP Card. Add these files to the MIB database
of your SNMP management software (such as HP
OpenView
3. Using the Facilities provided by the SNMP
management software, you can access the individual
MIB objects. Refer to the MIB files on the supplied
CD-ROM for more information.

Viewing UPS Monitoring Parameters

The ConnectUPS Web/SNMP Card supports several MIB
groups that separate specific UPS parameters into related areas.
The groups used in the MIB for the card include:
Ident
Battery
Input
Output
Config
Control
Test
Alarms
Bypass
Traps

Forcing the UPS to Shut Down

The ConnectUPS Web/SNMP Card supports MIB groups
containing objects that enable the user to shut down and
restart the UPS.

Receiving Event Traps

The ConnectUPS Web/SNMP Card supports several
event-related traps, that can be reported to the SNMP network
management software. Refer to the MIB files found on the
supplied CD-ROM for more information.
28
ConnectUPS Web/SNMP Card (X and BD Models) User's Guide
IBM Director, and Sun NetManager).
,
Rev A www.powerware.com