Powerware BD User Manual page 32

UPS Power Management
page with your browser. This is especially helpful if you have
more than one ConnectUPS Web/SNMP Card and intend to
receive e-mails at a central location.
If your SMTP server requires a qualified domain name instead
of an IP address or requires a qualified user name in the
sender's email address, additional configuration items are
available with a serial or Telnet connection (see Chapter 3,
"Local Configuration" on page 9). SMTP configuration options
are available through
Settings menu. Under most circumstances, changes are not
required for these options.
NOTE To completely clear the contents of any configuration item, enter a
tilda (~) and press the Enter key.
SMTP Port Number –
via port 25. For installations where a different port number
is used, configure the port number using this option.
Substitute Domain Name for Sender's Email Address –
domain name for the sender's e-mail address is the
ConnectUPS Web/SNMP Card's IP address. You can enter a
qualified domain name with this option.
Optional SMTP Username –
Card's Identification Information field data is used as the
user name for the SMTP server as well as in the sender's
e-mail address. Use this option to configure a qualified user
name.
Note that the text used in the Identification Information
field remains unaffected; this text is also used to display
additional information when browsing the card.
Optional SMTP Password –
password may be required to obtain access to a SMTP
server. If your server requires a password, enter it here.
When changing any e-mail configuration items, it is strongly
recommended to use the
changes. Any e-mail errors are logged in the ConnectUPS
Web/SNMP Card Event Log. Review the Event Log within a
few minutes of testing the e-mail to see if any errors are
logged.
26
ConnectUPS Web/SNMP Card (X and BD Models) User's Guide
on the Web/SNMP Card
Email Notification
SMTP server access is typically gained
The ConnectUPS Web/SNMP
Under certain circumstances, a
function to test your
Send Test
Rev A www.powerware.com
The default