Powerware BD User Manual page 26

Remote Configuration
3. Select and edit the
Address
4. Select and edit the
5. Select and edit the
6. Select
NOTE If you changed the IP address in Step 3, you must restart the
browser using the new IP address (see page 18) to restore communication
with the ConnectUPS Web/SNMP Card. Repeat Steps 1 and 2 to continue
the configuration.
7. Select
page.
8. Enter the appropriate date and time information in
the specified format.
9. Select
The ConnectUPS Web/SNMP Card is now configured for
operation on your network. Refer to the remainder of this
user's guide and the online help for detailed information about
each menu selection.
20
ConnectUPS Web/SNMP Card (X and BD Models) User's Guide
ConnectUPS Web/SNMP Card IP
.
Gateway Address
Subnet Mask
to save the new settings.
Set Values
from the menu at the top of the
Date and Time
to save the date and time settings.
Set Values
for the network.
of the network.
:
Rev A www.powerware.com