Nvidia DGX A100 User Manual page 98

B.7 Power Cord Warnings
Use certified AC power cords to connect to the server system installed in your rack.
!
CAUTION: To avoid electrical shock or fire, check the power cord(s) that will be used with
the product as follows:
Do not attempt to modify or use the AC power cord(s) if they are not the exact type

required to fit into the grounded electrical outlets.
The power cord(s) must meet the following criteria:

The power cord must have an electrical rating that is greater than that of the
•
electrical current rating marked on the product.
The power cord must have safety ground pin or contact that is suitable for the
•
electrical outlet.
The power supply cord(s) is/ are the main disconnect device to AC power. The
•
socket outlet(s) must be near the equipment and readily accessible for
disconnection.
The power supply cord(s) must be plugged into socket-outlet(s) that is /are
•
provided with a suitable earth ground.
B.8 System Access Warnings
!
CAUTION: To avoid personal injury or property damage, the following safety instructions
apply whenever accessing the inside of the product:
Turn off all peripheral devices connected to this product.

Turn off the system by pressing the power button to off.

Disconnect the AC power by unplugging all AC power cords from the system or wall outlet.

Disconnect all cables and telecommunication lines that are connected to the system.

Retain all screws or other fasteners when removing access cover(s).

Upon completion of accessing inside the product, refasten access cover with original
screws or fasteners.
Do not access the inside of the power supply.

There are no serviceable parts in the power supply.
Return to manufacturer for servicing.

Power down the server and disconnect all power cords before adding or replacing any non

hot-plug component.
When replacing a hot-plug power supply, unplug the power cord to the power supply being

replaced before removing the power supply from the server.
DGX A100 System
Redfish APIs Support
DU-09821-001_v06 | 93