Nvidia DGX A100 User Manual page 97

B.5 Equipment Handling Practices
Reduce the risk of personal injury or equipment damage:
Conform to local occupational health and safety requirements when moving and lifting

equipment.
Use mechanical assistance or other suitable assistance when moving and lifting

equipment.
B.6 Equipment Handling Practices
Power and Electrical Warnings
!
CAUTION: Caution: The power button, indicated by the stand-by power marking, DOES
NOT completely turn off the system AC power; standby power is active whenever the
system is plugged in. To remove power from system, you must unplug the AC power cord
from the wall outlet. Make sure all AC power cords are unplugged before you open the
chassis or add or remove any non-hot-plug components.
Do not attempt to modify or use an AC power cord if it is not the exact type required. A
separate AC cord is required for each system power supply.
Some power supplies in servers use Neutral Pole Fusing. To avoid risk of shock use caution
when working with power supplies that use Neutral Pole Fusing.
The power supply in this product contains no user-serviceable parts. Do not open the power
supply. Hazardous voltage, current and energy levels are present inside the power supply.
Return to manufacturer for servicing.
When replacing a hot-plug power supply, unplug the power cord to the power supply being
replaced before removing it from the server.
To avoid risk of electric shock, tum off the server and disconnect the power cords,
telecommunications systems, networks, and modems attached to the server before opening it.
DGX A100 System
Redfish APIs Support
DU-09821-001_v06 | 92