Using the Remote BMC
•
The system will take a few minutes to boot.
If the DGX OS was installed with an encrypted root filesystem, you will be prompted to
3.
unlock the drive.
Enter "nvidia3d" at the crypt: prompt.
4.
You are presented with end user license agreements (EULAs) for the NVIDIA software.
5.
Accept the EULA to proceed with the installation.
6.
Perform the steps to configure the DGX A100 software.
7.
Select your language and locale preferences.
a).
Select the country for your keyboard.
b).
Select your time zone.
c).
Confirm the UTC clock setting.
d).
Create an administrative user account with your name, username, and password.
e).
Note: The BMC software will not accept "sysadmin" for a username. If you create this username
for the system log in, "sysadmin" will not be available for logging in to the BMC.
Create a BMC admin password.
f).
The BMC password length must be a minimum of 13 and a maximum of 20 characters.
!
CAUTION: Once you create your login credentials, the default admin/dgx- luna.admin
credentials will no longer work.
DGX A100 System
First Boot Setup
DU-09821-001_v06 | 20