Set Up An Iptv Port - NETGEAR Tri-band Mesh WiFi 6 Router User Manual

A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VLAN/Bridge Settings.
The VLAN/Bridge Settings page displays.
5. Select the Enable VLAN/Bridge Setup check box.
The page expands.
6. Select the Enable VLAN Tag radio button.
The page expands.
7. Click the Add button.
The Add VLAN Rule page displays.
8. Specify the following settings for the VLAN tag group:
• Name. Enter a name for the VLAN tag group.
The name can be up to 10 characters.
• VLAN ID. Enter a value from 1 to 4094.
• Priority. Enter a value from 0 to 7.
9. Select the Port1 check box.
10. Click the Add button.
The VLAN tag group is added.
11. Click the Apply button.
Your settings are saved.

Set up an IPTV port

You can set up the router to create an Internet Protocol television (IPTV) port that can
lease an IP address from your IPTV service provider. Use this feature only if you subscribe
to an IPTV service and your IPTV service requires an intranet address.
Some IPTV ports cannot work behind NAT because the IPTV port requires an IP address
within the Internet service provider's network (intranet address). You can set up a bridge
connection from the WAN port to the LAN port. The LAN port becomes an IPTV port
with direct access to the WAN without going through NAT.
Manage Network Settings
Nighthawk Tri-band Mesh WiFi 6
86 User Manual