NETGEAR Tri-band Mesh WiFi 6 Router User Manual page 100

A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Click the ADVANCED tab.
The ADVANCED Home page displays.
5. In the Internet Port pane, click the Show Statistics button.
The Show Statistics window opens and displays following information:
• System Up Time. The time elapsed since the router was last restarted.
• Port. The statistics for the WAN (Internet) port, LAN (Ethernet) port, and WLANs
displays. For each port, the following information displays:
- Status. The link status of the port.
- TxPkts. The number of packets transmitted on this port since the router was
last started.
-
RxPkts. The number of packets received on this port since the router was last
started.
-
Collisions. The number of collisions on this port since the router was last
started.
- Tx B/s. The current transmission (outbound) bandwidth used on the WAN
port and LAN port.
- Rx B/s. The current reception (inbound) bandwidth used on the WAN port
and LAN port.
- Up Time. The time elapsed since this port acquired the link.
• Poll Interval. The interval at which the statistics are updated on this page.
6. To change the polling frequency, enter a time in seconds in the Poll Interval field
and click the Set Interval button.
To stop the polling entirely, click the Stop button.
Manage your Router and
Satellite
Nighthawk Tri-band Mesh WiFi 6
100 User Manual