Polaroid P751 User Manual page 48

General Info.
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
40
A - MEDIA LOADING ORIENTATION
B - SMART CARD CONTACT STATION INTERFACE
DB - 9 SMART CARD
PINS CONTACT POINTS
1 CI (VCC)
2 C2 (Reset)
3 C3 (Clock)
4 C4 (RFU)
5 C5 (GND)
Refer to the Card Printer Programmer's Manual for complete programming
information.
DO NOT position printing over the Smart Card Chip.
P75i
User's Manual
Position the cards with the Smart Card Chip at
the top of the card and towards the printer.
When a command to the parallel printer
interface sends a card to the Smart Card
Contact Station, the printer connects the Smart
Card Contact Station to the female DB-9
connector on the rear of the printer.
An attached external Smart Card Programmer
can be used to program Smart Card chips.
DB - 9 SMART CARD
PINS CONTACT POINTS
6
7
8
9 (GND when chip is at station)
C6 (Vpp)
C7 (I/O)
C8 (RFU)