General Info.
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
9
SUPPLY SPINDLE
3.
print head carriage) and empty core (with tape
attached) onto the take-up spindle flange side in.
Make sure the ribbon comes off the top of the
supply spindle and feeds to the top of the
take-up spindle.
TAKE-UP SPINDLE
`CLICK'
4.
until an audible 'click' signals the locked-down
position.
5.
Please note that the ribbon automatically
synchronizes whenever the print head lock
down occurs.
The ribbon specifications will be sent to the
printer and the driver parameters will
automatically be set.
P75i
User's Manual
Load ribbon onto the supply spindle (under
Push down on the Print Head Lock Lever
Close Cover.