Dect Handset Installation - Planet SKD-200 User Manual

INT
C
R
Number 0 –9 and #
＊＃

DECT Handset Installation

The three rechargeable Ni-MH batteries (AAA size) come with your phone. Install the batteries before using your
phone.
1. Slide the battery cover in the direction of the arrow and pull it out.
2. Remove old batteries, if any, and insert new batteries as indicated, matching correct polarity (+, -).
3. Replace the battery cover, slide the cover up until it snaps shut.
Note
Intercom conversation mode
Adjust the volume level during the conversation and menu selection on
the LCD display
Last Number Redial
Hang on / up telephone or pressing until to enable the speaker.
Cancel and Clear
Power on / off
The function is as the same as the general phone set
Enter Skype mode
This phone won't work by itself. It should be registered
to the main base unit inside the SKD-200
Before initial using, it should be charged for 24 hours.
Descriptions
8