Table of Contents
Advertisement
( with smart country
code )
Make a PSTN Call
Receiving a Call
Using Speaker Phone
Muting the
Microphone
Adjusting Voice
Volume
Register Handset
Clear Registration
Transfer Call
00886 (Taiwan's country code is 886)
2. Pick up the handset and press the
3. Dial ＊area code + telephone number＃
4. To end the call, either press the
charger.
1. Pick up the handset and press the
2. Dial a PSTN phone number.
3. To end the call, either press the
charger.
1. When a call is coming, press button
2. To end the call, either press the
charger.
1. To turn the speakerphone on, press
appears on the display.
2. To turn the speakerphone off, press and hold the
disappears on the display.
1. To mute the microphone, press the
2. To turn to the normal mode, press
Note: In the mute mode, the icon will appear
1. Press
or
Note: During a call, you can adjust the earpiece volume from level 1 to 9.
1. Turn on USB or Adapter power (the base will open to register for 1 minutes)
2. Press
button to go to HS register, press INT button to enter.
3. Select the desired DECT base (Base1 for example). Press INT key,
DCT-100 will display Searching.... on the LCD screen
4. Wait till a machine hardware ID shows up, ex: 002F5-11708H, then press
INT
5. When machine prompts for PIN number, inert PIN number 1590 then press
INT, then DCT-100 will start to register to base and showing Searching....
6. Once the registration is completed, the DCT-100 will show HS x, Base y on
the screen. (x is the registered handset number and y is the registered
DECT base.)
Note: Registration is available
1. Power off the DCT-100 handset.
2. Press the INT button and R power on button together, and DO NOT release
the buttons till the LCD displays "F->clear Subs"
3. Press the
button to clear the handset base settings.
Not Sub
4. Wait till "
1. During handset 1 (HS1) conversation, press the INT button and enter the
button or replace the handset on the
button or replace the handset on the
button or replace the handset on the
button once more.
button to adjust the volume level.
" displayed; it is now not registering to any DECT base.
16
button.
button.
to answer it.
and hold the button until the icon
button until the icon
button while
icon appears.
on the display.
Advertisement
Table of Contents
