Husqvarna R 214T Operator's Manual page 4

Electrical system overview
1. Battery
2. Main fuse
3. Operator presence control (OPC)
4. Micro switch, parking brake
5. Safety switch for the lift lever
6. Ignition lock
Husqvarna Connect
The operators manual and more information about
the product is available at Husqvarna Connect App.
Husqvarna Connect is a free App for your mobile device.
Husqvarna Connect on page 12 .
Refer to
Operator Presence Control (OPC)
The OPC engages when the operator lifts from the seat.
The engine and the drive to the blades stop if the blades
are engaged or the parking brake is not applied. Refer to
Start conditions on page 8 .
Hour meter
The hour meter shows how many hours the engine
has run. The time with ignition on but engine off is not
registered. The last digit shows tenths of an hour (6
minutes).
4
7
6
5
1
2
Forward and rearward pedals
The speed is gradually adjusted with 2 pedals. The left
pedal (A) is used to move forward, and the right pedal
(B) is used to move rearward. The product stops when
the pedals are released.
Cutting deck
The cutting decks for this product are Combi cutting
decks with BioClip. BioClip cuts the grass into fertilizer.
The Combi cutting decks can also be used without
BioClip. Without BioClip the grass is ejected to the rear.
3
4
A
B
1686 - 002 - 16.12.2021