Table of Contents
Advertisement
7.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
Z97I-PLUS Front panel audio connector
8.
M.2 Socket 3
This socket allows you to install an M.2 (NGFF) module.
Z97I-PLUS M.2 socket
The M.2 (NGFF) module is purchased separately.
1-18
AAFP
PIN 1
HD-audio-compliant
pin definition
M.2 (SOCKET3)
®
Desktop Responsiveness technologies with PCIe M.2 device,
ensure to set up the Windows
PIN 1
Legacy AC'97
compliant definition
®
UEFI operating system under RAID mode.
Chapter 1: Product introduction
HD Audio
AC97].
Advertisement
Table of Contents
