Table of Contents
Advertisement
3.
MemOK! button (MemOK!)
Installing DIMMs that are not compatible with the motherboard may cause system boot
failure. Press the MemOK! button until the memory compatibility tuning for successful
boot.
CROSSBLADE RANGER MemOK! button
1-24
takes about 30 seconds for the system to test one set of failsafe settings. If the test
fails, the system reboots and test the next set of failsafe settings.
timing set is tested. If the installed DIMMs still fail to boot after the whole tuning
Vendors Lists) in this user manual or on the ASUS website at www.asus.com.
continues memory tuning after turning on the computer. To stop memory tuning, turn
off the computer and unplug the power cord for about 5–10 seconds.
to boot and load the BIOS default settings. A message will appear during POST
reminding you that the BIOS has been restored to its default settings.
ASUS website at www.asus.com after using the MemOK! function.
®
OS environment.
Chapter 1: Product introduction
Advertisement
Table of Contents
