Table of Contents
Advertisement
Memory configurations
You may install 1 GB, 2 GB, 4 GB and 8 GB unbuffered and non-ECC DDR3 DIMMs into the
DIMM sockets.
1-10
excess memory from the higher-sized channel is then mapped for single-channel
operation.
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
a)
Use a maximum of 3GB system memory if you are using a 32-bit Windows OS.
b)
Install a 64-bit Windows OS when you want to install 4GB or more on the
motherboard.
c)
For more details, refer to the Microsoft
com/kb/929605/en-us.
(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked or at
a higher frequency, refer to section 3.4 Extreme Tweaker menu for manual memory
frequency adjustment.
memory load (4 DIMMs) or overclocking condition.
®
support site at http://support.microsoft.
Chapter 1: Product introduction
Advertisement
Table of Contents
