Pitney Bowes DM225 Operating Manual page 9

General
To comply with health and safety standards, operators must observe all local
standard safety precautions relating to the operation of office equipment. In
particular DO NOT remove covers from the machine.
Keep fingers, long hair, jewellery and loose clothing away from moving parts at all
times.
In order to comply with Post Office regulations, DO NOT tamper in any way with
Post Office seals.
Compliance
This is a Class A product. In a domestic environment this product may cause
interference in which case the user may be required to take adequate measures.
In order to comply with Class A limits, the power cord must be 3 metres in length.
Pitney Bowes certifies that the F921 Postage Meter, F8MM Mailing
Machine and F9MM Mailing Machine complies with the essential
requirements of the Low Voltage Directive 73/23/EEC, EMC Directive
89/336/EEC and the R&TTE Directive 1999/5/EC.
The F8XX and F9XX series Postage Meters have been designed to work
on all Pan-European Analogue Telecommunication Networks.
For a formal Declaration of Conformity please contact Compliance
Engineering on +44 (0)1279 426731.
Introduction
1-3