Configuration
Replace Print Head
What is it?
Where is it?
Action...
Tape Calibration
What is it?
Where is it?
Action...
3-28
This function allows a Pitney Bowes Service Engineer to
install a replacement print head into your machine.
In the Advanced Functions Menu.
Select Options > Setup Menu > Advanced Functions >
Replace Print Head
This is not an Operator function. If you inadvertently
select this option, press CE/C to exit.
This menu option is available on the DM300 only. It allows
the machine to be set for the tape strip length being used.
In the U.K. this option should be left in its factory supplied
condition or the condition set by a Pitney Bowes service
engineer.
In the Advanced Functions Menu.
Select Options > Setup > Advanced Functions >
Tape Calibration
This is not an Operator function. If you inadvertently
select this option, press CE/C to exit.