Miele ProLine CS 1013-1 Operating And Installation Instructions page 11

Table of Contents

Advertisement

During installation, maintenance and repair work, the hob must be
disconnected from the mains electricity supply. The gas supply must
also be shut off. Depending on territory this is done in one of several
different ways:
- the mains fuse has been removed, or
- the screw-out fuse is removed (if applicable), or
- switch off at the wall socket and withdraw the plug from the
socket. Pull by the plug and not by the mains connection cable to
disconnect from the mains electricity supply.
- the gas inlet valve is closed.
Danger of electric shock.
Do not use the hob if it is faulty. Shut off the gas supply and contact
Miele.
If the hob is installed behind a cabinet door, do not close the door
while the hob is in use. Heat and moisture can build up behind the
closed door. This can result in damage to the hob, the housing unit
and the floor. Leave the furniture door open until the hob has cooled
down completely.
In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the appliance and
its surroundings clean at all times. Any damage caused by
cockroaches or other vermin will not be covered by the warranty.
Warning and Safety instructions
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proline cs 1018 gCs 1018Cs 1018 g

Table of Contents