Miele ProLine CS 1013-1 Operating And Installation Instructions page 10

Warning and Safety instructions

For safety reasons, this hob may only be used after it has been
built in.

This hob must not be used in a non-stationary location (e.g. on a
ship).

Never open the casing of the hob.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.

While the hob is under warranty, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.

Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.

The hob is not intended for use with an external timer switch or a
remote control system.

If the mains connection cable is damaged, it must be replaced
with a special mains connection cable by a registered electrical
worker (see "Electrical connection" in the "Installation" chapter).

The connection to the gas supply must be carried out by a
registered gas installer.
If the plug has been removed from the connection cable or the
connection cable is not supplied with a plug, the hob must be
connected to the electricity supply by a registered electrical worker
(see "Electrical connection" in the "Installation" chapter).
10