Panasonic SA-PTX7P Service Manual page 38

SA-PTX7P
Restoring backed up data
This function will restore the backup data that was saved on
your PC to this unit.
If the HDD requires service, please wait until the HDD has
been repaired before restoring the backup to the HDD.
Restoring the backup data to the HDD will reset the
HDD (no tracks on the HDD). If restoring fails, the
content of the HDD will be lost. When restoring the
backup data, therefore, please exercise the utmost
caution.
Perform "Preparation" and "Settings to check on the PC" as
described on OI page 87.
1
Press [SETUP].
2
Press [ ] to select "Other Setup" and press
[ENTER].
3
Press [ ] to select "Maintenance" and press [ ].
4
Press [ ] to select "Backup/Restore" and press
[ENTER].
5
Press [ ] to select "Restore" and press [ENTER].
6
Press [ ] to select "PC Name" and press [ENTER].
When the PC name is displayed
The PC name and other information that was used when
previous backups and imports (
performed may be displayed. In this case, check the PC
name again, and if necessary, follow the steps below to
make changes.
7
Enter the characters (
Input the "User Name" and "Password" in steps 6 and 7 in
the same manner.
8
Press [
[ENTER].
Restore begins.
A message will be displayed, indicating that restore is
complete. The unit will briefly stay this way, and then it will
turn off automatically shortly after.
To return to the previous screen
Press [RETURN].
Restore
PC Name
User Name
Passwo rd
Restore Cancel
ENTER
Cancel
OI page 40) were
OI page 69).
] to select Res tore and press
To cancel restore
1 Press and hold [ ] during restoring.
2 Press [ ] to select "Yes" and press [ENTER].
This unit is turned off and the restore is canceled.
If restore is canceled before completion, all progress up to
the point of cancelation will not be recorded and the HDD
will be completely empty. Restore this unit again later.
Note
Restore may be canceled if your PC is turned off in an
irregular manner or is forced to shut down due to errors. In
this situation, restore again from the beginning. However,
backups may not restore when the backup data contains
abnormalities.
38
Restore
This function will pause and the po wer will
turn off immediatel y.
Do you want to contin ue?
Yes No
ENTER