Table of Contents
Advertisement
Light Network Settings
From the Sensors menu, select Lights, and select a paired light.
Enable: Turns on the light and allows you to control the light remotely with your Edge device. You can disable a
light to disconnect it from the light network.
Light Mode: Sets the light intensity and pattern mode, or turns off the light.
NOTE: This setting is available when you select the Individual light mode setting
page
13).
About: Displays device, software, and battery information.
Remove: Allows you to delete a paired light from the network.
Light Mode Settings
From the Sensors menu, select Lights > Network Options > Light Mode.
Auto: Automatically adjusts the light intensity and light mode based on the ambient light and time of day.
High Visibility: Sets the light intensity to flash mode or the brightest setting available.
Trail: Automatically adjusts the light intensity and light mode based on the ambient light and time of day. This
mode is recommended for mountain biking.
Individual: Allows you to customize the light intensity and pattern mode for each light in your network
Network Settings, page
Customizing the Radar Alert Settings with Your Edge 1030
Before you can customize the radar alert settings with your Edge device, you must pair the devices.
You can customize how the radar alerts sound and display on your Edge device.
1 From your Edge device, select
2 Select your radar device.
3 Select Sensor Details > Alert Settings.
4 Select an option.
Pairing the Radar Device with a Compatible Edge Device
This task is for the Edge 1030, 830, and 530 devices. If your device is not listed, go to buy.garmin.com.
1 Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while pairing.
2 Turn on the Edge device.
3 From the Sensors menu, select Add Sensor > Search All.
4 While the Varia RCT715 device is turned off, hold the device button for 2 seconds to enter pairing mode.
The status LED flashes purple, and the tail light turns on. The device is in pairing mode for 5 minutes or until
you press the device button.
5 Select your sensor.
When the sensor is paired with your Edge device, the radar and bike light status icons appear solid.
Other Compatible Devices
13).
> Sensors.
Other Compatible Devices
(Light Mode Settings,
(Light
13
Advertisement
Table of Contents
