Connections; Step 1: Set Up The Surround Speakers; Step 2: Placing The Speakers And Subwoofer - Philips DVD Micro Theatre MCD759D User Manual

Connections

IMPORTANT!
– The type plate is located at the
bottom of the system.
– Before connecting the AC power cord
to the wall outlet, ensure that all
other connections have been made.
– Never make or change any
connections with the power switched on.
– A separate power switch is provided
on the back of the subwoofer. Please
switch it on after completing all
connections in order to enjoy 5.1-channel
sound output.
Step 1: Set up the surround
speakers
1
Before connecting the speakers to the DVD
system, firmly attach the mini speaker stands to
the surround speakers as shown in the above
diagram.
OR
2
Alternatively, you can choose to mount the
speakers on the wall. Mount a screw (not
supplied) on the wall where the speaker is to be
hung and hook the speaker securely onto the
mounted screw.
Note:
– The surround speakers are labeled as REAR L.
(left) or REAR R. (right).
10
OR
Step 2: Placing the speakers and
subwoofer
Center speaker and
DVD system
Front speaker
(Left)
1
3
Surround
Subwoofer
Speaker (Left)
For best possible surround sound, all the
speakers (except subwoofer) should be placed
at the same distance from the listening position.
1
Place the front left and right speakers at equal
distances from the TV and at an angle of
approximately 45 degrees from the listening
position.
2
Place the center speaker above the TV or the
DVD system so that the center channel's sound
is localized.
3
Place the rear speakers at normal listening ear
level facing each other or hang on the wall.
4
Place the subwoofer on the floor near the TV.
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to your TV.
– Allow adequate ventilation around the DVD
system.
2
Front speaker
(Right)
1
3
4
Surround
Speaker (Right)