Component; Tv Mode; Quality; Hdmi Setup - Philips DVD Micro Theatre MCD759D User Manual

System Menu Options

COMPONENT

Sets the video output according to your video
connection. This setting is not required if you are
using the VIDEO OUTPUT jack (yellow) to
connect the DVD micro system to your TV.
➜
S-VIDEO: Select this if you have connected
➜
Pr/Cr Pb/Cb Y: Select this if you have
connected the DVD micro system to your TV
using Component video jacks.

TV MODE

Selects interlace or P-SCAN video output mode
when Pr/Cr Pb/Cb Y is selected.
➜
P-SCAN and INTERLACE.
In the progressive scan mode, you can enjoy the
high quality picture with less flickers. It only
works when you have connected the DVD
player's Y Pb Pr jacks to your TV that supports
the progressive video input. Otherwise, a
distorted picture will appear on the TV. For
proper progressive scan set up, see "Getting
Started - Setting up Progressive Scan feature".

QUALITY

This menu helps you to set the video quality.
1
Press 3 4 to highlight "QUALITY".
2
Press 2 or OK to enter COLOR SETTING
SETUP.
The options included in VIDEO QUALITY
SETUP page are: "SHARPNESS", "BRIGHTNESS",
"CONTRAST", "GAMMA", "HUE",
"SATURATION" and "LUMA DELAY".
SHARPNESS
Adjusts the sharpness level.
➜
HIGH, MEDIUM and LOW.
BRIGHTNESS
Adjusts the brightness level. Range: -20-+20.
34
CONTRAST
Adjusts the contrast level. Range: -16-+16.
GAMMA
Adjusts the gamma level.
➜
HIGH, MEDIUM, LOW and NONE.
HUE
Adjusts the hue level. Range: -9-+9.
SATURATION
Adjusts the saturation level. Range: -9-+9.
LUMA DELAY
Adjusts the luma delay.
➜
0 T and 1 T.

HDMI SETUP

The options included in HDMI SETUP Page are:
"HDMI" and "RESOLUTION".
HDMI
This option is used to enable/disable HDMI
output.
➜
ON: Enables HDMI output.
➜
OFF: Disables HDMI output.
RESOLUTION
You can select the resolution of the picture
according to your preference and the connected
HDMI TV.
The resolution options include 480p (60Hz),
720p (60Hz), 1080i (60Hz), 576p (50Hz), 720p
(50Hz) and 1080i (50Hz).
Notes:
– This option is available only when the
"HDMI" is set to "ON".
– If no display appears on the TV screen
due to unsupported resolution, reconnect any
available interlace video output to your
display and re-adjust the resolution settings
to 480p/576p.

PREFERENCE PAGE

The options included in PREFERENCE PAGE are:
"TV TYPE", "AUDIO", "SUBTITLE", "DISC
MENU", "PARENTAL", "DEFAULT" and
"PASSWORD SETUP".