Password may require a number of characters including alphabet and numerals.
NOTE
7. You will be redirected to the
Configuration Screen.
9. After changing the device configurations, press the Save button to save the configurations. The settings will
not be applied until user presses this button.
Rinnai
8. The Page will allow you to configure the Enviroflo and will have some
general information.
7
WI-FI SET UP
•
Current date and time. This
is automatically set when the
mobile device is synchronised.
•
Timer mode On/OFF. This
function activates the Schedule.
Three Run Modes can be
•
configured. The check boxes
can be selected to the users
preference. The minimum time
between on and off is 15 minutes.
•
A graph will display your
scheduled settings. Make sure
that the time does not overlap
each other.
The days of the week can be
•
selected when the Enviroflo
runs on factory setting or on the
Scheduled Timer.
•
Recommendations button
to display Manufacturer
recommendation operation time.
Using RESET button, user can
•
reset the configurations.
EHPA_A Heat Pump Wi-Fi OM