Wi-Fi Compatibility / Connectivity; Minimum Requirements - Rinnai EHPA250VMA Operation Manual

Wi-Fi COMPATIBILITY / CONNECTIVITY

Enviroflo Heat Pump Hot Water Systems models are fitted with built-in Wi-Fi connectivity. Using the Rinnai Enviroflo
Timer App (available from Apple App Store or Google Play) it is then possible to use a smart phone to operate the
appliance's timer function remotely. Multiple compatible appliances can be added as required.
A Wi-Fi router (paired with the appliance via the Rinnai Enviroflo Timer App) is used to control the appliance(s).
The Appliance(s) MUST BE installed in a location that has Wi-Fi router coverage.
If the controlling mobile device is outside of the Wi-Fi router's coverage i.e. operating remotely,
IMPORTANT
you will not be able to access the Heat Pump timer function.
1. The Appliance
2. Smart phone (using Wi-Fi)
3. Wi-Fi router
4. Internet connection

MINIMUM REQUIREMENTS

• Enviroflo Heat Pump Hot Water Systems models:
EHPA250VMA
EHPA315VMA
Wi-Fi Router, 2.4G frequency range supporting 802.11b/g mode, with coverage of the Appliance(s) location
•
• For remote cloud based operation Wi-Fi router / modem with active internet connection
• Smart phone / Tablet (
Rinnai
Within common Wi-Fi router range
(Local connectivity only)
2
EHPA250VMAW
EHPA315VMAW
(Android – API 19 & above or iOS 9 & above)
1
4
EHPA250VMAH EHPA250VMAWH
EHPA315VMAH EHPA315VMAWH
) with the Rinnai Enviroflo Timer App installed.
5
INTRODUCTION
3
EHPA_A Heat Pump Wi-Fi OM