Side Tone Control - Yaesu FTA-450L Operating Manual

 T o a d j u s t t h e V O X
gain, select one of the
following gain levels on
the item "VOX LEVEL"
of the COMM SETUP
m e n u i n t h e S E T U P
mode.
MIN / LEVEL1 / LEVEL2
/ LEVEL3 / MAX
 To set the VOX delay,
select one of the follow-
ing times on the item
"VOX DELAY" of the
COMM SETUP menu in
the SETUP mode.
0 . 5 s e c / 1 . 0 s e c /
1 . 5 s e c / 2 . 0 s e c /
3.0sec
FTA-450L O
perATing
a
dvanCed
COMM SETUP
VOX LEVEL
MIN
LEVEL1
LEVEL2
LEVEL3
MAX
COMM SETUP
VOX DELAY
0.5sec
1.0sec
1.5sec
2.0sec
3.0sec
M
AnuAL
o
peratIon

Side Tone Control

When utilizing an external headset, you may monitor
your own voice when talking into the microphone
through the headphones.
Note:
Do not activate the side tone function when connecting
the optional microphone SSM-10A.
 To activate the monitoring of your voice (side tone),
select one of the following side tone level on the
item "SIDE TONE" of the COMM SETUP menu in
the SETUP mode.
MIN / LEVEL1 / LEVEL2 / MAX
COMM SETUP
FREQUENCY STEP
TX TOT
MIC SELECT
SIDE TONE
AF PITCH CONT.
VOX
VOX LEVEL
VOX DELAY
 To change the side tone level temporarily during
the monitoring, rotate the DIAL selector knob when
pressing and holding the PTT switch.
COMM SETUP
SIDE TONE
OFF
MIN
LEVEL1
LEVEL2
MAX
35